How To Clean Deer Antlers- How To Efficiently Clean Deer Antlers

How To Efficiently Clean Deer Antlers

One of the advantages of obtaining antlers from a shop or marketplace like shopping websites is that they are already sterilized and prepared for you to use them for any artworks projects. Uncleaned and fresh deer antlers usually contain numerous harmful microscopic organisms, like bacteria, which you can’t see with your naked eyes. If not sterilized, touching and working on this antler can place you at a very high risk, especially if you a hunter who obtained them from your hunting trips, and can infect you with awful sicknesses and diseases. This is the main reason why you need to know how to clean deer antlers.

Regardless of whether you have old or fresh deer horns, it's critical to set aside some reasonable amount of time to clean them. Old antlers are cleaned to keep up an enchanting appearance, while fresh ones must be sterilized to take out harmful microorganisms and germs.

The good news is that cleaning and sterilizing both old and fresh antlers is a simple and clear process that anybody can do and adapt with. Simply follow the step-by-step guides below to have a clean, attractive and disease-free deer antler.

More...

Guidelines for Cleaning Deer Antlers

The motivation behind cleaning fresh antlers is to eliminate debris, dirt, hair, blood and any other disturbing particles or substance remaining on them. Let's be honest, nobody wants to work with a deer antlers that still have hair or substance on it. This is the reason why it's vital and essential to appropriately clean them in advance. The cleaning process only requires 20-30 minutes of your time.

Things Required For Cleaning

  • An antler shed
  • A soft scrubby sponge, a Toothbrush and a bristle brush used for heavier bath cleaning
  • 1/4 C. baking soda, blended with enough water until it becomes a paste
  • Elbow grease
  • 1 C. warm water blended with 1 C. hydrogen peroxide
  • 12-gage wire for designing and hanging
  • Old towel
  • Wire cutters or strong sharp scissors

How To Clean Deer Antlers- Steps to Follow

Step 1: Separating From The Skull Cap

The first step is that you must physically take out the antlers from the boney rectangular zone called the skull cap. This process requires a little amount of elbow grease for the separation because deer antlers actually grows out from the skull cap,

To begin the separation, get a hacksaw and immovably saw each antler at the ground level where it joins with the cap. Due to their irregular shape, you may need to protect the antlers to keep the saw cutting edge from moving around amid this process. Keep sawing through the ground level of the antlers until they become isolated from the skull cap.

Step 2: Scrubbing

After you've isolated them from the skull cap, you'll need a wire brush to clean them down to eliminate any outstanding organic matter on them. This process is called Scabbing.

This process requires a basic grill cleaning model and not making use of just any fancy brush. You can get a wire grill brushes accessible at most home improvement stores. Give careful attention to the zone around the ground level of the antler, as this is the place where the hair and tissue will be hiding. Give it a thorough scrub and it will fall off without much exertion.

http://idlehandsawake.com/

Step 3: Boiling Water

The third step is to clean fresh antlers includes by boiling them in water. Few people may feel somehow towards this step but it's important to eliminate any microbes present in them.

Fill a large cooking pot with water and add a couple dashes of salt. The cooking pot should be large enough to the extent that all the antler will be submerged in the water without any exposure. Put the pot on either a fire pit or stove and sit tight for the water to bubble and boil. I suggest doing this step outside over a fire pit, as it might generate an irritating smell that will linger on for quite some time. Let be honest, you won’t want to stink up your house for attempting to clean a few antlers.

Step 4: Finishing Up

Leave the antler a chance to boil for around 25-30 minutes. Sometimes, you will need to adjust them so that every inch can be submerged in the boiling water. This process may not be an easy one especially if you have to deal with large antlers. I will recommend using a kitchen utensil to hold them down. Air-dry them outside after the antlers must have boiled effectively.

Antlers are typically delicate and sponge-like instantly after they are boiled and will return to their solidified state subsequent to drying. Avoid abandoning them in the sun for longer than a day, as the sun can cause a bleaching effect on the regular antler’s color.

Cleaning Old Antlers and Antler Furniture

Old antlers also require cleaning often and often. In case you have antlers items or furniture, for example, centerpieces, lamps or chandeliers, they need to be cleaned and sanitized to prevent dirt and dust from accumulating over time. This is a much simpler and easier procedure than cleaning fresh antlers, as there's no organic matter to eliminate.

With only a wet fabric or towel and a drop of soap, you can effectively clean most antlers. Take the towel and swipe it under warm water with the soap added. Then, wring it out. Make sure not to make use of a totally soaked towel, as an excessive amount of water will cause more damage. Take the damp towel and wipe them down in any direction you want.

In case you still have some on the antlers, just scrub it with more force and exertion. Although, few people make use of bleach to clean their antlers, but I've discovered that this shortcut method can stripe the antler’s original color, thereby making them look dull and unattractive. When you are done, clean the antler again with a neat towel to reduce the dampness.

Conclusion

If you found out that your antler is still in velvet, you should try boiling them in water mixed with soap. A while later, eliminate any outstanding strands of velvet. Most antlers discovered to be in velvet will seem permeable and in this manner, stand a high chance of accumulating dirt more easily. Once more, you can make use of beeswax waterproofing to seal the pores and secure the antlers

One of the awesome ways for hunters to celebrate their trophy buck Is by mounting deer antlers. As the antlers are being hanged on the wall so that everyone can see and admire, they tend to accumulate lots of dust and debris Also, excessive exposure to sunlight can cause fading making the deer antlers look old and shabby. Luckily, with only some antlers paint and some household items, you can effectively clean deer antlers and prevent the future fading occurrence. We do love to know your experience about cleaning a deer antler. You can leave us a comment below

Kevin Steffey

Kevin Steffey

I am Kevin who is a founder of deerhuntingfield.com; Here at Deer Hunting Field, we want to teach and educate. Hunting is a passion which has existed in mankind since almost the beginning, and with the advent of the internet, we can now share information, tips, and more with each other faster than ever before. This is a crucial part of our philosophy.

Click Here to Leave a Comment Below

Leave a Comment: