The Best AR 15 Bipod Reviews Today That Will Improve your Hunting Skills
Shooting from even ground is one thing. But as you may already know, there are many different angles and positions in which a shooter should have complete control over their rifle.
A bipod is one of the wisest investments you can make for your AR-15 rifle. This attachment can improve your shooting accuracy by providing better support and eradicating many human errors.
However, as there are several bipods from different manufacturers in many price ranges, choosing one for you can be challenging. Here are the best AR 15 bipods we've selected to simplify the process for you.
In a hurry? This is our Winner!
Best Ar15 Bipod Comparison
|CVLIFE 6-9 Inches Tactical Rifle Bipod|
|UTG Tactical OP Bipod, QD Lever Mount|
|AVAWO Hunting Rifle Bipod|
|Harris S-BRM Bipod|
|UTG Super Duty Bipod|
|CVLIFE 9-13 Inches Rifle Bipod|
Top 10 Best AR15 Bipod Reviews
The Atlas V8 is so lightweight at 2/3 pounds that you can easily carry your gun with one of the best AR-15 slings. But the hard-anodized aluminum construction and many innovative features also give this bipod a very solid feel.
It’s a good bipod for AR-15 because the build quality and finishing of the stainless steel internal catches and springs are very impressive and help the bipod make a good case for its expensive price.
The firm rubberized feet of this lightweight AR-15 bipod avoid the bipod and your gun from bouncing from hard surfaces. They're tough enough, and there is no evidence they would degrade due to rough handling when your rifle gets bumped around a lot.
There are five leg positions, with the shortest giving a 5-inch lift from the ground and up to 9 inches at full extension. If your rifle comes with a lever fit clamp, you can clip the bipod on and off easily for storage.
The lateral buttons at the pivot points of both legs allow the user to set the fore-aft angle for shooting, transport, and storage with just one press.
The legs can be angled forward so you can dig them into the ground and load the bipod by pushing the gun into it. And, of course, you can have them perpendicular to your gun as well. These important anchors are all made from stainless steel for durability and hardness.
On each leg of this AR-15 Picatinny bipod, there is also an aluminum locking collar, which you can pull down to loosen the telescopic tube that controls the leg extension.
If you're only familiar with Harris bipods, this different mechanism may be awkward and tricky at first. But this design is actually more intuitive and accessible, allowing you to operate the bipod more quickly, especially when you're in the prone position and want to reach forwards.
The Atlas V8 is also one of those bipods that provide the “pan” feature. It's certainly not everyone's cup of tea: some like working with it, others don't. You can control it (and the “cant” capability) on the V8 within 15 degrees of movement and tension them with a knurled knob on the base unit.
B&T makes plenty of short BT15 Picatinny rails available on its website. You can buy them separately to mount the underside of commonly stocked rifles. These items can offer a better anchor point to your bipod than their competitors, which could move the pivot axis too far away from the barrel and floor.
The impact of those loose devices can be felt when the bullet goes through the barrel, creating a powerful torque and slightly making your gun flick in the opposite direction. With a BT15 rail, you can avoid that without having to tighten the pivot attachment - a brilliant design we really appreciate.
- Solid construction
- Come with both tilt and pan features
- Slightly expensive
- Require a Picatinny rail fitting
If you're familiar with typical mounts, the CVLIFE bipod is pretty straightforward to install. It has jaws into which your AR-15 could be mounted via the rail adapter. If your firearm has only a bare rail with no mounting points, use the included adapter inside the box to attach this bipod onto it.
There is a hose piece between the jaws of this AR-15 tactical bipod. You can only remove it by loosening the adjuster on the bottom so you can move the jaws forward and take the hose off. If you use an adapter, get the jaws between the holes and tighten them. If not, rail-mount your firearm with an adapter.
Made from aerospace-grade aluminum alloy with a non-rusting anodized finish, the bipod is lightweight and looks solid.
This affordable bipod has a decent performance. You can position the spring-loaded feet at different heights. However, the incremental adjustment of the leg position may also mean your gun may not be level on uneven ground.
Coupled with the fact that it doesn't allow for any side-to-side movements, this CVLIFE is more suitable for flat surfaces like a benchtop than the field. Still, for the money that CVLIFE asks for it, it's still a solid deal and certainly better than nothing.
CVLIFE claims that this bipod has an upgraded high-strength tension screw that can handle and provide enough tension, and in reality, it looks fine. But this tightening screw may strip sooner or later. The rail adapter is solid, however, and the finish is robust given its price.
Overall, this is an affordable bipod that can work well in many situations as long as you know in advance what it's capable of.
- Simple to install
- Decent usability
- Only suitable for flat surfaces
- Not very well-built
The UTG Tactical OP bipod can give you a sturdy solution for your firearm without costing an arm and a leg. Made from heavy-duty metal, it can easily stand up to any harsh weather conditions you encounter on the field.
This bipod has a quick detach and works with both Picatinny and Weaver rails. If you need a good bipod that can be used on multiple rifles to adjust the sight, you're in for a treat. This quick disconnect mount makes sure it happens seamlessly at your convenience.
There are three extension notches providing a secure position when you adjust the legs, and the thumbwheel offers precision adjustments in addition to a quick retraction button.
This lockable thumb wheel can lock the legs of the UTG Tactical OP bipod to any length from the seven notched positions. If you lock the thumbwheel, you can even set the legs between the notches.
The notched leg positions are nice as you can easily set to your favorite position and know immediately whether the legs are level. You can unlock the thumbwheel and press the quick retraction clamp to snap the legs into their shortest position - the 50-degree angle that can give you a solid base for shooting.
The rubber footpads, swivel action, and foldable arms all do a great job making this UTG bipod work well on many surfaces without moving or slipping.
The swivel stud adjustment is a big highlight of this UTG bipod. You can mount it to a front stud, add a Picatinny rail to the stock, and mount this bipod with the QD lever mount.
The rubberized feet sit firmly on the ground, allowing the bipod to rest at a height between 8 and 12.4 inches.
There is a small screw on the stud adapter to connect the swivel stud on your gun and the adapter. Unless your rifle comes with a front quad rail handguard, this swivel stud will come in handy and make the mounting faster and easier.
However, this ability to adjust the leg height doesn't mean it's designed for all applications in mind. Sometimes, you may have to, for example, use your 20-round mags even if the legs are at full extension.
Many users have also complained about the leg extensions, which are not easy to fit the rail. According to the manual instructions, you may have to use a wrench to make the UTG Tactical OP bipod fit perfectly to the rail of your AR-15.
- Durable and robust construction
- Stable base
- Quick detachment
- Great leg positioning
- The height is not suitable for 30-round mags
When we received the AVAWO bipod in the mail, it was packed in bubble wrap without any instructions or datasheets. This can pose some issues to those who’re not familiar with mounting a bipod before. But if you've done it before, mounting the AVAWO bipod is pretty straightforward.
Despite its incredibly cheap price tag, this bipod looks sturdily constructed right at first glance. If you've ever owned an expensive Blackhawk Sportster bipod before, you will feel right at home. Aside from some unimportant differences, such as the different rubber pads and screws, these bipods are very similar.
The adjustable legs are spring-loaded, and when fully closed, you can release it to the fully extended position at the push of a button. Between those positions, the legs can be adjusted incrementally between intervals of about 1/2 inches.
You can mount the AVAWO bipod onto your AR-15 with the legs either backward or forward - it's up to your preference.
The legs are fairly stable when opened, but they may bend a little bit if you abuse them. The AVAWO bipod is not suitable for rough handling, but for typical target shooting and hunting, the construction is sturdy enough to be up for the task. You can prevent loosening by locking down the screw.
All in all, the AVAWO model is the best AR-15 bipod for the money. If you're looking for a low-priced bipod for your AR-15, there are few better choices.
- Very affordable
- Solid enough for general hunting and target shooting
- No instructions included
- Not the best durability
#5- Best harris bipod for ar15: Harris S-BRM Bipod
Whether you're going to shoot your AR-15 seated at a bench or in the prone position, the Harris S-BRM bipod will live up to your expectations.
This bipod has an amazing construction quality with hard-treated steel and hard alloys. Meanwhile, the all-weather coating means you can deploy it anywhere you need without fearing corrosion or rusting, making it the best rifle bipod for long range shooting.
Its legs can extend to any height between 6 and 9 inches. You can easily fold up the legs when not in use. These spring-loaded legs make both quick deployment and maximum stability possible, making it a good choice even on uneven terrains.
The entire bipod is extremely lightweight at 0.8 pounds, meaning even if you don't detach it from your rifle, the bipod won't add much to the overall weight.
The non-slip rubberized feet help produce a stable shooting platform, and on top of that, the Harris S-BRM bipod can tilt and “cant” to either side - the kind of useful flexibility you may need in many situations. Even in an emergency, you can still quickly attach/detach this Harris.
The biggest hurdle for owners of Picatinny rails is that they would have to buy a separate adapter in order to use this bipod.
The choice of not including an adapter is usually understandable because not all rifles have rails. But for the kind of money Harris asks for this bipod, customers are within their rights to demand an adapter included in the box. Luckily, a decent adapter is not an expensive attachment to buy, even though it may cause some inconvenience.
- Amazing build quality
- Versatile swiveling head
- Quick attach/detach mechanism
- Weather-proof design
- Can't lock out the tilt function
#6- Atlas CAL
When you're in love with the build quality of Atlas bipods but don't really need the Panning feature, the Atlas CAL is the ideal choice.
Accu-Shot introduced the CAL bipod lineup in 2018, retaining the legs and a high level of adjustability that have made a name for this manufacturer's bipods. The major difference is you don't have the pan feature in this variant.
The ability to pan is admittedly not everyone's cup of tea. Some love it; some don't. Its biggest advantage is you can traverse your rifle left and right while it's being fixed, making it easier to track or scan moving targets.
However, the addition of this feature can make your bipod lose stability when under sustained recoil. It may also put your rifle into an unstable and not rigid position. If you're not a fan of the pan feature, you'll appreciate Accu-Shot's decision not to incorporate it in the Atlas CAL bipod.
On the bottom of the Atlas V8, there is a knob that you can use to adjust tension. The thing is, it's fairly hard to reach this knob from the prone position.
Meanwhile, the CAL variant features a KMW Pod-Loc handle instead of that knob on the backside. If you need to change the tension, just loosen or tighten this handle as necessary.
Another benefit of this handle is the fact that you can pull out and re-index the handle when needed. This can come in handy when you don't want it to interfere with your shooting position and tuck it away.
The legs of the Atlas CAL bipod are pretty much the same as those of the V8 version. There is a button to adjust the angles, including stretching them at a 45-degree forward or rearward angle, straight down, and straight backward or forward.
The height of those non-rotating legs is adjustable as well. You can press or pull the leg collar to increase or decrease the height between 4.75 and 9 inches.
Much like other Atlas bipods, another highlight of the CAL variant is the detent that holds the legs in place. This simple yet effective mechanism allows users to change the feet according to the shooting surface or add optional extensions.
The minor issues with the Atlas CAL are the screws for the Picatinny rail. They are too short and have to come off entirely to grab the Picatinny rail. And, of course, the prohibitively expensive price may put off a lot of AR-15 shooters with a limited budget.
- No pan feature (a personal preference for many gun owners)
- Excellent build quality
- Compatible with many extensions
- Short screws for the Picatinny rail
#7- Magpul Bipod
Magpul is one of those mid-range bipods that can still get the job done with an elegant design. Made of injection-molded polymer and anodized aluminum, the bipod is quite durable despite its weight. The low-profile design doesn't just conceal your rifle's hardware and mechanism but also reduces its movements.
The whole point of the Magpul bipod is about quick one-handed control and adjustments. You can adjust it easily with one hand and extend the spring-loaded legs up to four inches, making them neatly slow forward or quickly snap back and lock into place. With the push of a button, the extensions will also slide in and lock securely as well.
Conventional bipods used to use a lot of heavy metal with exposed springs. They are a real hassle for many shooters; close it the wrong way, and you will injure yourself.
But this is not the case with the Magpul bipod. The manufacturer has removed the exposed springs and introduced lightweight polymers into the construction.
On the other hand, the amount of polymer in this bipod is a deal-breaker for many who find faults with it and discard the Magpul bipod despite its other amazing feature. It's also not a bipod for heavy rifles. Your AR-15 may work, but you may encounter stability issues with heavier Ruger Precision 338, for instance.
- Reasonably priced
- Elegant design
- Decent durability
- Easy to use
- A high level of polymer in the construction
- Not for heavy rifles
#8- Feyachi B13
This inexpensive bipod has an okay value as basic AR-15 equipment. The Feyachi B13 comes with two spring-loaded legs that can rotate to give you a base for sighting or precision shooting.
In most situations, the bipod is stable enough. But you may notice significant recoil depending on your ammo. The performance is not top-of-the-line, but given the kind of money Feyachi is asking for, it's not a bad choice.
The feet deployment is easy and quick with the press of a button. They sit securely when you snap them back, or even better, insert an extra screw to lock them.
However, these legs are quite thin. While collapsing them is not hard, it's still a hassle, and there is sound telling you the legs are securely locked.
Feyachi could also improve the installation process in future versions. The hex bolts on the mounting plate may strip, and you may have to replace the screws to make the adjustment easier. If you need something seriously powerful, look elsewhere.
- Moderately stable in most scenarios
- Tricky to install
- Low build quality
When you're tired of finding enough sandbags for your AR-15, the UTG Super Duty bipod can liberate you from such trouble.
This bipod looks well-made, tight, and rugged. It has way less plastic than other models at the same price range. All the moving parts and mechanisms are snug, snapping cleanly in place and holding as they should. Nothing feels ill-fitting, loose, or too tight.
You can mount a tight attachment into your AR-15's sling swivel stud with ease, thanks to the mount adapter, making the detaching and reattaching easier. The UTG Super Duty bipod holds the gun steady. It might not be better than your current sandbag, but there is no doubt the whole experience is more convenient with a bipod like that.
But like any fixed bipod, be careful about your movements, so you don't put much stress on the sling post of your rifle. There are no springs to help you with extensions as well. When you press the lever, the lower section will just sit there, and you will have to pull it out manually.
- Suitable for adverse terrain
- Rugged construction
- No one-handed mechanism for extensions
Given its price tag, this CVLIFE bipod is very well-built. The springs are stiff and supportive enough so the legs won't collapse on their own like many other inexpensive bipods. It's very easy to install an AR-15 into this bipod, while there are no frills with its operation either.
The leg length range (from 9 to 13 inches) is also a big plus, making it easier for many shooters to get comfortable with the prone position and not have to kink their neck to aim down the scope.
This tall bipod may not work for every situation. You may need a shorter one in case you're sitting in a tree stand, for example. The lack of instructions is also a big let-down. Experienced gun owners should have no problem figuring out all by themselves, but for beginners, it can be an issue.
- Tall height
- Sturdy for the price
- No instructions
- The height is not suitable for every shooting scenarios
Why You Should Have A Bipod For Your AR-15
Shooting off a random rest or a patch of sandbags is great and all, but it's useless when you're hunting or taking part in competitive shooting. This is when a bipod can come in handy.
When properly installed, this attachment offers additional stability that no other resting solutions can rival, especially compared to shooting free-hand. You can directly attach a bipod into your AR-15 and become free of anything else that you need to lug around. And this leads to several benefits you might be aware of.
It's always better to aim your shot in a stable base. Without a bipod, you must rest your elbow on the ground and squeeze your shoulders to increase the chance of your shot hitting the mark.
But the downside is that this hands-only method may make your AR-15 wobble, and the accuracy and precision of your shot take a hit.
Bipods improve the way you control and interact with your rifle, giving a more accurate shot. This is especially important in long-range shooting (think about up to 200 yards, for instance).
➜ Best Shooting Tripods Reviews
➜ Best Shooting Rest Reviews For A Perfect Hunting – Best Shooting Rests Reviews
➜ Best Shooting Sticks That You Can Get In The Market Now (#2 Should Really Please You!)
It's hard to concentrate when you only have your shoulders as support. You get tired more quickly, and the ability to coordinate is also badly affected, especially with a heavy rifle.
Bipods are simple portable attachments that can help you with this issue. They can't only improve your shot's accuracy but also improve your physical position and condition with better support. Some of them come with rubber feet - a good thing on uneven terrain.
Give You A Free Hand
In addition to making the shooting easier, bipods also allow you to carry out other tasks at the same time, such as looking at a manual or answering a call.
How To Find The Best Bipods For AR-15
Everyone has a different definition of the word "best,” regardless of whether it’s the best bipod for AR-10 or the best tactical bipod for AR-15. In the shooting and hunting field, the best pieces of equipment are those that are efficient, easy to use, and last a long time.
These features will significantly affect your performance while shooting. So, it's best to know these things first to make sure that you will be spending your cash on the right product.
In the rest of the article, we will introduce the things which you need to consider when planning to purchase the best rifle bipod for AR-15.
Types Of Bipods
This conventional design has only two legs to provide support and allow the rifle to be held securely in the horizontal position. You can fold the legs for transportation, and your AR-15 will still stay attached. Many bipods also have adjustable legs, meaning you can change to length and height to adapt to a new shooting position.
The biggest advantage of this design is traditional bipods are widely available, and you can find and buy a model for a good price.
As a weapon grip, these systems are attached near the forward hand of the shooter. When you press a button on the front, the grip will switch from a fore-grip to a bipod-like attachment. This design is commonly used in the US's armed forces, but for typical hunting and competitive shooting, grip pods are usually not the default choice.
The bipod also depends on the caliber you're going to use. A big .50 rifle requires an extremely sturdy and robust bipod, while a lightweight .22 one could still work well with a less solid bipod.
Aim for a lightweight bipod for AR-15 since typically, AR-15 has light recoil, and the owners move around with it a lot.
There are some models that come with specialized feet. They can help your bipod excel at many situations, whether you're shooting on soft ground, from a tree, or off barricades.
Soft surfaces can make your AR-15 bounce significantly more due to recoil, making it harder to follow up with your shots. This is because your bipod can't have a firm grip on the ground, and special feet could cause this problem.
The best bipod should have interchangeable feet to be more versatile and able to adapt to all circumstances you usually find yourself in.
Tilt And Pan
You can track a moving target easier with a bipod that can tilt up and down and pan left and right. If you're target-shooting, for instance, it's better to shoot without a bipod for safety reasons.
This isn't a must-have feature, but marked and notched legs can help you get a precise level with ease, especially when you are primarily shooting from a bench at a consistent height.
A bipod can last for several years, so it makes sense that you should make the right decision and get one of the best AR 15 bipods right from the beginning. A quality bipod will make sure you have easy deployment, adapt to a new shooting position, and handle moving targets with better accuracy.
If you're still confused with all of that, consider picking the Atlas V8 if money isn't a problem for you. With an elegant and lightweight design, superb durability, and amazing stability, it's an outstanding piece of engineering.
And when you need to find the best AR bipod with a limited budget, the UTG Super Duty model is not a bad choice.