BLOG - Page 46 of 49 - Deer Hunting Field

How to Get Deer to Come to You in 6 Easy Steps

It’s been years since you brought in a deer, maybe it’s even been awhile since you’ve sighted a buck worth taking a shot at. It’s not your fault, you just don’t know the tricks of the trade yet. This is especially a problem for stationary hunters, you simply don’t know how to get deer to come to you.

Follow these instructions, and you’ll never have that problem again. Let the deer come to you, fill those tags, and enjoy the thrill of the hunt with an ease you never have before.

What You’ll Need

Thankfully, most of the items you’ll need for attracting deer are readily available in hunting shops, or even just from artifacts of your past hunts.

Rubber Boots
Forage Grade Seeds
Deer Call

Deer Scents
Simple Gardening Tools
Antlers

Once you have all of these items in your possession you’ll be ready to follow this simple guide and get started on attracting the deer to you in order to get the best results while you’re in the field.

How to Get Deer to Come to You – 6 Easy Steps

1.) Control Your Scent

Deer have a hellacious sense of smell, and they can scent out hunters pretty easily. The best way to start is to make sure that you’re not running around reeking like… well, like a human. You’ll want to be downwind even at the best of times, but there’s quite a bit you can do to help yourself out in this area.

There are special shampoos, detergents, and even dryer sheets which can help you to cover the scent in your clothes. There are also cover scents that you can apply while you’re out hunting to help matters. If you think you’re going overkill on taking care of your scent, then you’re probably getting close to doing enough.

Protip: Try using rubber hunting boots as well, due to their nature they’re virtually scentless and you’ll find that they can help quite a bit in keeping your olfactory profile down to manageable levels.

2.)Use a Kill Plot

A “kill plot” is an ideal solution for those who have access to private areas, but it requires quite a bit of forethought and preparation in the off-season. Essentially what you’ll be doing is setting up a food plot within the range of your hunting weapon of choice in order to maximize your chances of a successful harvest.

If you’re on land that’s well managed, you might want to try and put something a little bit different there to attract deer despite the human scent around it. Set your stand up at a distance you’re sure you can make a clean shot from, and you’re good to go.

Protip: If your state allows it, you might also want to bait the kill plot. Something different from the general food in the area is always better, as animals crave diversity in food just like we do. It’ll definitely increase your chances of getting that prize-winning buck you’ve always dreamed of.

3.) Antler Rattling

Antler rattling is designed to simulate the sound of bucks fighting, which will naturally attract the attention of other deer. You’ll find that it’s most effective during the rut since bucks will be sparring during that time over a doe.

Rattling antlers are most effective in areas where there’s a lot of competition over doe. You won’t have nearly as much luck if the doe-to-buck population ratio is heavily in favor of the females.

It’s a pretty simple process, all you’ll need to do is get a couple of antlers and… well, rattle them together. There’re some specific techniques that will work better, but you should definitely try to simulate fighting. Smack them together, lock them up, grind them a bit.

The best part is, most hunters will have an antler rack lying around from a previous hunt, so you won’t need to spend any money to utilize this technique.

4.)Deer Calls

Deer calls are widely used and for good reason. They’re one of the best ways to get animals coming in closer so you can take the shot. There’s a number of good calls on the market, but to make the most of your tool you’ll want one that will let you make a number of vocalizations without having to switch calls.

It’s more of an art than a science, but if you’re careful your application you can really make a huge difference in your ability to get deer close.

During the rut a good strategy is to switch between doe “bleats” and buck “grunts” as it might convince younger bucks that some action is about to go on. If you’re lucky you might even get an older, aggressive buck intent on stealing the doe for itself and be able to add a serious trophy to your wall.

5.) Scented Attractants

Scents are a common tactic employed by hunters, with sometimes varying effects. The thing is, most people don’t pay enough attention to the wind or use them properly. You’ll need to employ a variety of scents and some clever tactics to get the maximum effect out of your scents.

For instance, non-estrous doe urine can make a great way to cover your tracks on the way into your favored spot. Estrous doe urine scent on a rag dragged behind you can also make an effective way to lure bucks along the lines you want them to follow.

You can also use estrous doe scent as a lure, place the scents a bit off from your stand and you’ll get bucks coming in to investigate.

The best usage of scents definitely comes in during the rut, if you’re hunting at other times it can be useful but it’s not the most effective route.

6.) Set Up Mock Scrapes

Mock scrapes are an often-overlooked tactic which can help to draw in bucks quite easily. The first thing to do is find an ideal location for the set-up. You’ll want to find somewhere you know there will be bucks to complete the illusion of an intruding male in their territory. The edges of fields are a great place to begin.

Rake out the leaves under a branch that’s roughly 4 ½’ off the ground, this will be the “licking branch” and it’s vitally important that you have this in place.

If you have an ideal location without the branch you can try breaking off a branch and holding it at the proper place with a zip tie. Spray it down with buck scent after you’re done and you’ve got your scrape in place.

Protip: Use all of the scent-control protocols from step one of this guide while you’re setting up the scrape and it’s far more likely that you’ll attract a buck who feels challenged. You’ll have much better results if you haven’t stunk up the place.

Conclusion

As you can see, there’s a variety of tactics which can get the deer to come to you. By employing all of them properly you’ll exponentially increase your chances of getting the buck of your dreams or filling your meat freezer for the year.

Once you know how to get deer to come to you, the rest will lie on your quickness and marksmanship to complete the most thrilling part of the hunt.

Did you enjoy this article? Have your own methods of getting your quarry in? Leave us a comment below!

How To Attract Deer Fast- 6 Steps That Will Have You Attracting Whitetail Like A Pro

Let’s face it, we all want to attract deer, fast. If you own your own land, or have access to a willing friend’s, then you can definitely make the best of things. The American whitetail is an elusive animal, and many of us have spent all morning and afternoon waiting for our quarry only to be irritated that we didn’t see a single one.

Once you’ve completed this guide you’ll have done everything you can in order to make the area you hunt in friendly for deer, which will greatly increase your chances of bagging the big one next season. Read on, because here a primer on the art of how to attract deer fast.

What You’ll Need

Before we begin, let’s take a quick look over what you’ll be wanting to make sure you have in order to get the deer right where you want them.

Land– You’ll need access to some land that you can manage in the off season, ideally this will be yours but a friend’s can work just as well and you might even get some help.
Seeds- Try to make sure that you purchase deer food plot seeds if you’re unsure of what you’re doing. Otherwise, just make sure that you have a wide variation of different foods available.
Waterproof Containers- You’ll be using these to create watering holes. They’re not essential if the property you’re working on has water features like streams and creeks already however.
Basic Tools– You’ll need a few tools to clear trails and possibly make some holes in fences. Chances are you won’t have to go out of your way to find them if you own the property, since you’ll have them around anyways.
Salt Licks- Use these to create spots where your deer can get minerals.

It really shouldn’t cost you too much, the main investment here is going to be your time. Keep in mind that this is certainly going to be a rather lengthy affair, but it’ll all be worth it once the next hunting season rolls around.

How To Attract Deer Fast – In Six Step

1.) Scout the Property

Whether the land you’re on is big or small, you’ll want to scout it out in order to determine what you need and where you need it. You can find great locations for the steps in the rest of this guide by carefully going over the land around you.

Communicate with your neighbors. Not only do you need to know if they’re okay with you chasing a wounded deer onto their property, but you want to provide things that they don’t have on their property in order to attract the animals.

Protip: Treat your scouting trips like a hunting trip. Use rubber boots and scent eliminators in order to avoid getting human scent all over everything while you’re taking a look. Remember that deer will instinctively avoid humans in many cases.

2.) Set Up a Food Plot

Food plots should be your primary consideration for getting deer onto the property. You can attract quite a few of them, and halfway control their movement by planting a few plants. If it sounds too good to be true, well, you do have to put in some work but you’ll love the payoff.

Protip: Consider investing a little bit of money and getting some “forage grade” seeds like this instead of planting something low-quality and overly cheap. It will mimic your deer’s normal feeding routine, and make things a lot easier on you. Either way, go with mixes, as the diversity of food will keep them coming back.

3.)Create Homes for the Deer

If you have the room on your property, you should definitely consider making actual “sanctuaries” for the deer you’re trying to attract. Remember that deer prefer forests because of the cover, if you can see over three hundred feet through the trees… so can they, and they’ll feel insecure.

Bucks, in particular, are extremely wary. If you have a heavily forested section of the property, consider making it off-limits to everyone in order to allow the deer to remain unmolested until, hopefully, you get the shot when they wander into your food plot.

Obviously, this isn’t much use when you don’t have enough property but you can still create quite a bit of traffic by allowing sections of your land to become thickly forested and leaving them alone year-round.

4.)Mind Your Fences and Create Trails

If your property is entirely surrounded by fences, it will be quite hard for new whitetails to get in. Even shorter barbwire fences that they can easily leap can create something of a pain for them to get around and may discourage them.

The easiest way to handle this is to strategically create holes in your fence-line in order to allow them to easily pass. You can do these either by roads where deer sometimes get funneled to, or along adjacent property if your neighbor is okay with it.

The key is to make access easy, but not to completely open your fences to the world. If you scouted properly you probably already have a few areas in mind by the time you’ve reached this point. You might want to consider running some trails through the more thickly vegetated parts of your property as well to make things even easier on the deer.

5.) Make Watering Holes

Deer need water, just like everything else, and not everyone has a creek sitting around on the property they own. You can make your own watering holes pretty easily, however, which can add to the experience of “home” for the whitetails you’re trying to attract.

There’s no need to rent or borrow heavy equipment either. If you have access to some fifty-five gallon drums you can simply cut them in half and sink them into the ground, and if you don’t you might want to just buy a couple large plastic containers and sink them.

6.) Place Salt Licks

Animals are inherently attracted to mineral sources, and you can work on attracting some more deer to your property by making sure that they’re present. Set the salt licks in strategic places around the property for the deer. If you use scouting cameras, they make a good place to set them up.

Bovine salt licks work pretty well for managing wildlife and they’re available for low prices. There’s no need to overcomplicate things here.

Summary

What you’re really trying to do here is to create a stable environment for the deer to exist in even during the off-season.

Once they get comfortable you’ll soon find your property teeming with whitetails and you’ll have a much easier time filling your tags during the next season.

It’s all in the details if you’re goal is figuring out how to attract deer fast. Good luck, and happy hunting!

Did you like the article? Have your own tips? Let us know with a comment below and be sure to share it with your friends.

What Is A Safe Way To Unload A Muzzleloader – The Best And The Safest Way To Unload A Muzzleloader

Have you ever encountered any situation whereby a firearm explodes in your hand? Having a firearm blast in your hand isn’t anything to joke about. It has happened to someone before and will most likely happen again and again.

This is the main reason why you must discover the best and the safe way to unload a muzzleloader before you load it up in order to avoid any explosion. This article attends to the question on what is a safe way to unload a muzzleloader and all other safety measures concerning muzzleloader.

Knowing About Muzzleloader

A muzzleloade is a kind of firearm into which the projectile and propellant charge are loaded from the forward part of the firearm’s barrel called muzzle and because of this, it was named muzzleloader.

A muzzleloader is entirely different from today’s firearm because modern firearms are harder to make, breech-loading and are integrated with high technologies and innovations. Muzzleloader weapons are harder to fire, load and clean. Muzzleloader are of two kinds: we have rifle-type and smoothbore muzzleloader.

The term “Muzzleloader” can be used in so many ways. It can be used to refer to a marksman who has practical experience in using a muzzleloader firearm.

Muzzleloader can likewise be used to depict an individual shooting this kind of firearm.

Muzzleloaders are popular with target shooters and hunter and are commonly used in historical re- enactments. The muzzleloading season is a favorite season loved by many hunters and it happens once in a year.

The main reason why most hunters prefer muzzleloaders is simply because of the powerful black powder weapon it is using and the fun derived in firing it.

Why It’s Important to Unload a Muzzleloader?

Muzzleloaders are meant to be clean every time they are shot. It is extremely unsafe and dangerous to clean a loaded muzzleloader.

This is because the weapon uses a corrosive material called black powder which can spoil the weapon and results to fouling or pitting effect if it is permitted to stay on the muzzleloader for a long time.

This effect can reduce the accuracy and precision of a weapon and sometimes makes it hard for the weapon to load.

Most muzzleloader manufacturers now recommend different cleaning guides. It is highly advisable to adhere and stick to the manufacturer’s guidelines to clean the firearm.

There is certain shooting competition purposely arranged by muzzleloader manufacturers in order to make people obey the cleaning guidelines.

If you don’t listen and follow every cleaning guides or suggestions in the competition, you could be disqualified and evicted from participating again.

In order to prevent any occurrence of fouling, shooters are advised to swab the barrel with a damp patch every time it is fired.

To produce a perfect result, the patch should be made of manufactured materials such as cotton.

It’s best to pick a cleaning kit made particularly for muzzleloaders. Every once in a while, shooters should learn to clean the firearm’s lock.

For most models, the lock is held together with a bolt or two. Loosen the bolt, clean both sides by scrubbing it let it dry and oil it before replacement.

Approaches to Unload a Muzzleloader

It is advisable to read and understand the instruction manual to ensure there you commit no grievous mistake. Many people think they don’t have anything to do with the manual and some people will only flip through.

However, for your safety and that of the people around you, find time to look at the loading and unloading section. There are ways to go about unloading a muzzleloader. They are:

1- Utilizing a Co2 Discharger

You can clear your barrel using a CO2 discharger, and the best approach to discharge depends on the kind of muzzleloaders that is being used. Anytime you make use of a flintlock muzzleloader, always remember to put the discharger against the touchhole. If it is a percussion bolt muzzleloader, simply slip the discharger over the areola.

2- Backstop

You can likewise discharge your muzzleloader into a suitable backstop. A backstop is a thing put behind or at the back as a boundary or support. It’s is advisable not to shot the muzzleloader into the ground as the shot could ricochet. Also, don’t shoot into the air as the shot could freefall, endangering the lives of people on the ground.

3- Modern In-Line Muzzleloader

Most shooters don’t need the old ways of unloading a muzzleloader because of the modern in-line muzzleloader. If that is the situation, all you need is to take away the breech plug basically. After that, push the projectile and powder out of the barrel’s rear.

Once the muzzleloader is emptied, put your loading bar or your ramrod in the barrel. Do this critically before you incline your muzzleloading firearm against a nice shooting rest. Don’t forget to repeat this step. Forgetting this step will allow debris to fall in the barrel thereby blocking the touchhole.

Conclusion

Always remember that If your muzzleloader has not been fired in 30 seconds, you should re-prime the pan and attempt it once more. Hold on for an additional 30 seconds. If the muzzleloader still refuses to shot, use a CO2 discharger to take away the powder and projectile charge.

If the CO2 discharger fails to work, read through the owner’s manual to know more about the procedures. Obviously, emptying a muzzleloader likely requires more consideration than really shooting it. Also, it’s your obligation and duty to know the best possible approaches to unload it. I hope this article have really helped you.

What You’ll Need

How to Get Deer to Come to You – 6 Easy Steps

1.) Control Your Scent

2.)Use a Kill Plot

3.) Antler Rattling

4.)Deer Calls

5.) Scented Attractants

6.) Set Up Mock Scrapes

Conclusion

What You’ll Need

How To Attract Deer Fast – In Six Step

1.) Scout the Property

2.) Set Up a Food Plot

3.)Create Homes for the Deer

4.)Mind Your Fences and Create Trails

5.) Make Watering Holes

6.) Place Salt Licks

Summary

Knowing About Muzzleloader

Why It’s Important to Unload a Muzzleloader?

Approaches to Unload a Muzzleloader

1- Utilizing a Co2 Discharger

2- Backstop

3- Modern In-Line Muzzleloader

Conclusion

More Hunting Gear & Resources